Lead acid charger for 6V/12V/24V lead acid, SLA batteries
ALCT 6-24/10 with pole terminals, manual
3 Years
€84.99 SRP
incl. 19% VAT, excl. shipping cost
ALCT 6-24/10
Sku:1001-0014

Description

The ALCT 6-24/10 is a fully automatic charger suitable for maintenance-free lead acid and lead gel batteries of output voltage 6, 12 or 24 V. After connecting the pole terminals the device automatically detects the output voltage of the connected lead acid battery and gives a corresponding LED indication on the display. If the battery is completely discharged, the charger automatically switches to REFRESH mode and charges the battery by pulse charging until a sufficient voltage has been reached and the normal charging process can be started.

Depending on the voltage a charging current of 1, 5 or 10 amps can be chosen, so car batteries can be charged very quickly and smaller motorcycle batteries can be charged safely. Without a manual adjustment the ALCT 6-24/10 will charge with the default charging current of 1 amp. At low temperatures below 5°C a COLD TEMPERATURE mode (optional) ensures that the lead acid battery will be fully charged to 100% despite the weather conditions. A clear display provides reliable information about the different settings as well as the current charge state of the battery (35-70-100%). In case of a defective battery the "FAULT" LED is lit and charging stops.

The charging process is optimized according to special charging technology developed in house. Once the battery is fully charged the charger automatically switches over to trickle charge, to ensure the battery is not overcharged. Motorcycle, motor boat and lawn mower batteries can be left connected for an extended period (e.g. during winter time) to ensure that they are always ready for use whenever they are needed. Designed for continuous battery power supply the ALCT 6-24/10 can be left connected to the battery without interruption and keeps the battery fully charged, even if the battery is loaded/discharged at the same time. This means that the battery is always available at full capacity.

If the battery will still not start the vehicle, the ALCT 6-24/10 has built-in automatic starting aid support. When connected to the mains supply and the battery, the charger detects an attempt to start the engine and automatically provides the highest current available. For maximum safety the lead acid charger is equipped with electronic protection against short-circuit and reverse polarity. Thanks to its numerous features the ALCT 6-24/10 ensures safe, gentle and consistent charging providing optimum performance and long battery life.

Leading consumer magazine, TestPraktiker, rates Ansmann lead acid battery charger "very good"

Popular German consumer magazine TestPraktiker tests and reports on products in a real world environment and not under laboratory conditions. With the help of journalists and engineers the tests are carried out by consumers for consumers. A wide range of items - everything
from household devices and garden tools to office supplies, multimedia products and bicycles - are tested for suitability and daily use.

From first use, the testers liked the ease of use, compact design and ability to transport the Ansmann ALCT 6-24/10 lead acid charger. The charger impressed with its fully automatic control as well as a number of other useful features which resulted in the following review: "The Ansmann battery charger is characterized by simple operation, reasonable price and high quality functionality.

A very handy device, this lightweight charger is always ready to use. It reads the state of charge of a connected battery and gives clear indication on the display.
Very positive: Both lead gel and lead acid batteries can be charged using the Ansmann charger."

Technical Data

Color black
Packaging cardboard box
Input Voltage 230V AC
Output

6V: 1A
12V: 1A / 5A / 10A
24V: 1A / 5A

Maximum output current 10000
features automatic voltage detection
applications automatic voltage detection

Downloads

Pdf
Manual | ALCT 6-24-10